Based on our knowledge of years in this domain, we are counted amongst the foremost manufacturers and exporters of Vaccum Tray Dryer. These dryers are designed with vacuum chamber, thick stainless steel plate and heavy duty flange & stiffeners, so as to provide high functionality. Our offered tray dryer is quality tested and then provide to the customers at affordable price range. These Vaccum Tray Dryer is available for the clients in different specifications, as per their variegated requirements.
- Flow glass in between to monitor
- Digital Temperature Indicator
- Excellent insulation
Vacuum Tray Dryers
- Main Body/Vacuum chamber thick SS 316 plate with heavy duty SS 316 flange and stiffeners.
- Door thick SS 316 plate (hemisphere shape) with heavy duty SS 316 flange.
- Shelves Hollow type pads with SS 316 Sheet and Baffles.
- Condenser (shell and tube) and Receiver SS 304 with Isolation valve and Flow glass in between to monitor condensation.
- Trays (with out back folding ) in SS 316 rounded corners and edges.
- Explosion Vent/ Rupture Disc on vacuum chamber
- Digital Temperature controller (FLP) with solenoid controlled Pneumatic operated valve at Hot water inlet.
- Provision for Validation Port on Body.
- Digital Temp. , Indicator (FLP) at H.W. inlet & outlet.
- Digital type Vacuum gauge and Digital Temperature Indicator (FLP) in vapor line.
- Pressure release valve in steam line.
- View Glass/ Light glass provided on vacuum chamber Dorr, Body and Receiver.
- Silicon Transparent gasket for door.
- Nitrogen purging valve provided on Vacuum chamber.
- Vacuum break valve provided on vacuum, chamber.
- Drain valve for Vacuum chamber and Receiver.
- Temperature Accuracy plus minus 2 to 3 degree
- Finish; Internal 320 grit Mirror Polish and outer 180 grit mat finish.
- Condenser and Receiver in SS 316 instead of SS 304
- Insulation on the vacuum chamber outer surface except door. The insulation is enclosed and covered with removable SS 304 panels.
- Skirting /wall panel all along the body/vacuum chamber flange.
- Validation port with Censors.
- Hot water system ( steam heated) with MS tank ( Insulated), SS 304 steam radiator/electrical heaters, circulation pump with FLP Motors and controls.
- Vacuum Pump ( 2stage water ring) with FLP motor.
|model||RDVTD 3||RDVTD 6||RDVTD 12||RDVTD 24||RDVTD 36||RDVTD 48|
|no. of trays||3||6||12||24||36||48|
|capacity in kg||03/05/12||12/18/12||25-35||50-75||75-100||100-150|
|tray volume in lts /cap. in kg||5/1-1.5||10/2-3||10/2-3||10/2-3||10/02/03||10/2-3|
|tray size l w h in mm||406 x 406 x 31||812 x 406 x 31||812 x 406 x 31||812 x 406 x 31||812 x 406 x 31||812 x 406 x 31|
|no. o heating shelfs||4||7||7||9||13||17|
|shelf size in mm||430 x 430||430 x 835||835 x 835||835 x 1259||835 x 1250||835 x 1250|
|distance between shelves in mm||100||100||100||100||100||100|
|trays on each shelf||1||1||2||3||3||3|
|condensor||0.2 m2||0.5 m2||0.75 m2||1 m2||1.5 m2||2 m2|
|reciever||10 ltrs||25 ltrs||50 ltrs||75 ltrs||100 ltrs||150 ltrs|
|vacuum pump capacity||1 hp||3 hp||3 hp||5 hp||5hp||7.5 hp|
|h.W distribution pipes||1.5 inch||1.5 inch||1.5 inch||1.5 inch||1.5 inch||1.5 inch|
|no if door bolts (40 mm dia)||4||8||10||10||12||12|
Design C Tempratrue : 150 Degree Centigrate, Testing: The Vacuum Dryer Shelves Are Hydro-tested 5 Kg/Cm2 In Assembled Condition. The Vacuum Chamber Is Tested For Full Vacuum
|width in mm||1000||1250||1700||1800||1800||1850|
|depth in mm||1000||1500||1500||1900||1900||1900|
|height in mm||1250||1850||1900||2100||2250||2650|
|weight in mm||400||700||1000||1500||2000||2000|
Tray Size 16ÃÂ¢Ã¢âÂ¬ÃÂ X 32ÃÂ¢Ã¢âÂ¬ÃÂ 1.25ÃÂ¢Ã¢âÂ¬ÃÂ(h) . For models mentioned above tray can be raised to a maximum of 2ÃÂ¢Ã¢âÂ¬ÃÂ
Om-shivam Soc., Tarun Bharat Bldg. No.2, Opp. Cigaratte Factory, Sahar Road, Andheri (East), Mumbai, Maharashtra, 400099, India