Pharmaceutical Dryers

ViewView
  1. Stainless Steel Trays

    We Manufacture Stainless Steel Tray for Tray Dryer 16 x 32 x 1.25 and also we manufacture Alluminium and PP trays of the same size
    Send Inquiry
  2. ROTARY TUNNEL DRIER

    ROTARY TUNNEL DRIER General Advantages:Can operate either as batch type or continous type drier Operates at low power – Maximum of 5 Hp Drying time around 25% of that of Tray Drier – saves production time Temperature can be positively controlled anywhere between 35 to 200 degree
    Send Inquiry
  3. Double Cone Vacuum Dryer

    We manufacture Rotocone Vacuum Drryer, from 50 litres to 5000 litres, it is used for low temprature drying, we also manufacture Vacuum Tray Dryer
    Send Inquiry
  4. VACUUM TRAY DRIER

    RIDDHI VACUUM TRAY DRIER SIZE: 3 TRAYS, 6 TRAYS, 12 TRAYS, 24 TRAYS, 48 TRAYS & 96 Trays DESIGN SPECIFICATION:SR NO. TECHNICAL SPECIFICATION VTD 48 01) MAIN CHAMBER OVERALL SIZE 1350 MM W X 2150 MM H X 1000 MM D 02) CHAMBER 6 MM THK SS 316 Q FULLY WELDED REINFORCED WITH SS 304 Q 50 MM X50 MM SQUARE BAR & 50 X 100 MM M.S CHANEL SUPPORT (STIFFNER) ALL AROUND THE BODY.(OUTSIDE) CHAMBER MOUNTING ON 250X125MM “I” BEAM 02NOS LEG.03) HEATING SHELVES FULLY WELDED HOLLOW PADS IN SS 316 Q WITH 4 MM TOP & 3 MM BOTTOM WITH INSIDE 20 X 20MM SS 304 SQ.BAR ZIGZAG WELDING FOR HOT WATER CIRULATION.04) SHELVE SIZES 1650 MM D X 830 MM W X 28 MM 05) NO. OF SHELVES & HEAT TRASFER AREA OF HEATING SHELVES 16 + 01 NO dummy shelves. (TOTAL HTA HEATING SHELVES = 46.75M²)06) OUTSIDE INSULATION SS 304 14 SWG THK SHEET COVERING 07) SKIRTING SS 304 5MM THK PLATE X250MM W.08) VACUUM PIPING SS 316 09) FINISH INTERNAL ALL INTERNAL GRIT 240 MIRROR FINISH 10) FINISH EXTERNAL 180 GRIT DULL FINISHING FROM ALL OVER OUTSIDE.11) TEMP & VACUUM GAUGE REPUTED MAKE SS DIAL TYPE VACUUM GAUGE 01NOS AND TEMP.GAUGE 02NOS.12) GASKET SILICON ( FOOD GRADE ) SIZE-16X16MM 13) DOOR SS 316 8 MM THK. PLATE REINFORCED WITH 50 X 50 MM SS 304 SQUARE BAR.WITH 2NOS 150NB VIEW GLASS & THE INSIDE SURFACE OF THE DOOR FLANGE IN GROOVED TO ACCOMMODATE OF SILICON GASKET OUT SIDE 3 MM THK SS 304 SHEET FOR INSULATION COVERING.14) DOOR HINGES SS 304 HEAVY DUTY HINGES 02 NOS.15) LOCKING ARRANGEMENT SS 304 SQUARE THRADE WITH ROUND PIPE TYPE NUT.16) C.C. DISTANCE BETWEEN SHELVES 110 MM MINIMUM 17) ANNULAR SPACE BETWEEN SHELVES 80 MM 18) HOT WATER HEADER SUPPLY SS 304 SCH 40 PIPE(FITTED AT OUTSIDE OF DRYER)19) OPERATING TEMPERATURE 90 DEG Cᵒ20) DESIGN TEMPERATURE 110 DEG Cᵒ21) VACCUM DROP 50 MM / 24 HRS.22) DESIGN PRESSURE FULL VACUUM 23) FLANGE CONNECTION ALL NOZZALE AS PER ASA150 RAISED FACE HOT WATER INLET/OUTLET 25NB, VACUUM VENT 150NB, N2 PURGING 15NB, VIEW GLASS 150NB, TEMP SENSOR ETC 15NB.24) VACCUM GAUGE / MAKE *MICRO* MAKE 25) VACUUM BRAKING SS 316 NEEDLE VALVE TYPE 26) CONDENSER H.T AREA 4 M 2
    Send Inquiry
  5. Fluid Bed Dryer

    We manfuacture Pharmaceutical Dryers, like Fluid Bed Dryer, Tray Dryer, Vacuum Tray Dryer, Rotocone Vacuum Dryer
    Send Inquiry
  6. Tray Dryer

    We manufacture Tray Dryer or Drying Oven or Air Dryer from Lab model to 6,12, 24, 48 ,96, 192 tray dryer both electrical heated, oil heated, steam heated
    Send Inquiry
Contact Us

Om-shivam Soc., Tarun Bharat Bldg. No.2, Opp. Cigaratte Factory, Sahar Road, Andheri (East), Mumbai, Maharashtra, 400099, India
Phone :+918068090595