Cookie Img

Pallet Making Machine (Spheriodiser)

Pallet Making Machine (Spheriodiser)
Pallet Making Machine (Spheriodiser)
Product Code : RDSPD
Product Description

 

SPHER O DIZER

We are one of the pioneer Pharmaceutical Machinery Manufacturers from India, We manfuacter Pallet Making Machine, which is called Spehrodiser, from the extruder small sticks are achieved. Which are further put into sperodiser for achieving pallets, which are used for drug layering of sustained release products.Technical Offer

The machine consists of a round disc with a vertical shaft spinning at high speed at the bottom of cylindrical chamber. The cylindrical drum is called bowl and the spinning disc is called a friction plate. The friction plate has a groove pattern to increase the friction with the product. When the extrudes are charged into the spherodizer, they ate thrown to the end of spinning plate by centrifugal forces. By the contact with the plate, the extrudes are cut into short cylindrical segments which are gradually rounded by the collisions with the drum wall and the plate probabilities of fines generated during the process is there, these fines will adhere on the surface of the spheres again they can get under the friction plate, through the gap between the plate and the wall. The fines generated under the friction plate will be discharged from the machine by means of a propeller after a certain retention time, the particles have obtained the desired spherical shape, then the discharge is via centrifugal force.

The on going action of particles colliding with the wall and being the thrown back to the inside of the plate creates a rope movement of the product along the wall. The continuous collision of granules with the wall and the friction plate will gradually turn cylindrical, is essential for optimum spheronosation. 

The extrudes from the extruder are converted into spherical beeds due to the centrifugal force created by the high speed rotation of plate. 

The gap between the chequered plate and drum is reduced to minimum to avoid powders from falling down & beeds being crushed during the Spher'oidization process. 

The RPM of Spher'oidizer and choosing correct plate with proper formulation are the key factors. Each extrudate that comes in contact with the chequered plate, in then broken in length to its diameter, due to the tumbling & rope effect of the beads get converted into spheres. Compressed connection is provided to facilitate rope formation and avoid crushing of pellets.

Technical Specifications 

Model

Output
Per batch

Motor HP

Compressed
air(kg/cm2)

RPM

Weight
(Kgs)

Dimension in
mm LxBxW

RDSPD-150

0.1-0.25

0.5

N.A

100-3000

25

500x250x400

RDSPD-250

0.25-2

1

N.A

100-1500

60

550x350x600

RDSPD-380

0.5-4

2

2.5

100-1500

250

1000x600x950

RDSPD-700

2-28

5

2.5

100-750

450

1200x900x1100

RDSPD-900

5-60

7.5

2.4

100-750

700

1200x1400x1150

Approx. Capacity (Kg/hr./Operation)



 

SPHER O DIZER

We are one of the pioneer Pharmaceutical Machinery Manufacturers from India, We manfuacter Pallet Making Machine, which is called Spehrodiser, from the extruder small sticks are achieved. Which are further put into sperodiser for achieving pallets, which are used for drug layering of sustained release products.Technical Offer

The machine consists of a round disc with a vertical shaft spinning at high speed at the bottom of cylindrical chamber. The cylindrical drum is called bowl and the spinning disc is called a friction plate. The friction plate has a groove pattern to increase the friction with the product. When the extrudes are charged into the spherodizer, they ate thrown to the end of spinning plate by centrifugal forces. By the contact with the plate, the extrudes are cut into short cylindrical segments which are gradually rounded by the collisions with the drum wall and the plate probabilities of fines generated during the process is there, these fines will adhere on the surface of the spheres again they can get under the friction plate, through the gap between the plate and the wall. The fines generated under the friction plate will be discharged from the machine by means of a propeller after a certain retention time, the particles have obtained the desired spherical shape, then the discharge is via centrifugal force.

The on going action of particles colliding with the wall and being the thrown back to the inside of the plate creates a rope movement of the product along the wall. The continuous collision of granules with the wall and the friction plate will gradually turn cylindrical, is essential for optimum spheronosation. 

The extrudes from the extruder are converted into spherical beeds due to the centrifugal force created by the high speed rotation of plate. 

The gap between the chequered plate and drum is reduced to minimum to avoid powders from falling down & beeds being crushed during the Spher'oidization process. 

The RPM of Spher'oidizer and choosing correct plate with proper formulation are the key factors. Each extrudate that comes in contact with the chequered plate, in then broken in length to its diameter, due to the tumbling & rope effect of the beads get converted into spheres. Compressed connection is provided to facilitate rope formation and avoid crushing of pellets.

Technical Specifications 

Model

Output
Per batch

Motor HP

Compressed
air(kg/cm2)

RPM

Weight
(Kgs)

Dimension in
mm LxBxW

RDSPD-150

0.1-0.25

0.5

N.A

100-3000

25

500x250x400

RDSPD-250

0.25-2

1

N.A

100-1500

60

550x350x600

RDSPD-380

0.5-4

2

2.5

100-1500

250

1000x600x950

RDSPD-700

2-28

5

2.5

100-750

450

1200x900x1100

RDSPD-900

5-60

7.5

2.4

100-750

700

1200x1400x1150

Approx. Capacity (Kg/hr./Operation)



Contact Us

Om-shivam Soc., Tarun Bharat Bldg. No.2, Opp. Cigaratte Factory, Sahar Road, Andheri (East), Mumbai, Maharashtra, 400099, India
Phone :+917259712975